Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
- 3D forged one piece shaft and clamp base with robust cradle and top clamp - Length: 400mm - Turned CNC finish with a degree of texture for a positive clamp grip - Tough 6mm hardware, 0.5" clamp offset - 280g (27.2mm)
3T's Stylus is a fresh take on the 2-bolt aluminum seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. The Stylus 25 places the seat clamp assembly with 25mm of setback for a rearward position on the bike.
The Chester seatpost from Race Face is a durable, no-nonsense post that can take on rock gardens and plenty of rough landings while still leaving bills in your pocket for aprés ride festivities. Features • Seat tube drawn from 6061 Alloy • Proven dual bolt, multi-adjustable head design. • Shot peened for high impact strength & fatigue resistance.
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)
- Lightweight UD carbon construction - 1 bolt clamp system with wide angle adjustments - Matte carbon finishing - Compatible for Shimano DI2 battery integration - Weight from 199g - Available in 27.2mm, 30.9mm, 31.6mm - Length: 400mm
- Extra long forged 6061 aluminum post allowing maximum height adjustment - 2-bolt micro-adjust clamp - 450mm long - 345g @ 27.2mm
- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles
Introducing the Highline: years of research, development, and rigorous testing has given rise to the world's finest dropper post and remote. Premium sealing, exclusive Igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge deliver industry leading quality and reliability. The Highline features the world's most ergonomic remote: unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specs: Setback: Zero Length: 345mm (100mm travel)/ 395mm (125mm travel)/ 465mm (160mm travel) Material: 7075-T6 aluminum Minimum Stack height: 47mm Weight: 525g (100mm travel)/ 560g (125mm travel)/ 610g (160mm travel) Warranty: 3 years
Ionic is a seatpost design featuring the sophisticated and robust, 3T–exclusive DiffLock seat clamp. Ionic–0 places the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The splined alloy DiffLock coupling is a highly accurate method of setting saddle angle, needing only lightweight clamping by side-mounted bolts. It is especially useful for fine adjustment of saddle setback, which can be done without impacting saddle angle. Ionic–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - Alloy Difflock seat clamp fits only saddles with 7mm round-section rails - Clamp Style: Standard Rails - Color: Black
Stylus is a fresh new take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. Stylus–0 models place the seat clamp assembly in line with the seatpost for zero setback. Many athletes seeking outright speed favor this more forward position on the bike. Some frame designers are also specifying a slacker seat tube so riders can set their bike up with an inline post, which is lighter than a setback post. The top model Stylus–0 LTD is a monocoque in high-modulus carbon fiber, finished in UD Gloss Black. - High-modulus carbon-fiber seatpost - Two-bolt parallel clamp - Weight: 195 grams
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
Dimension Alloy seatpost. - 1-piece forged AL-2014 - Clamp Style: Standard Rails - Material: Aluminum - Max Height: 245mm - Min Height: 35mm - Weight: 250g
It’s a traditional straight up pivotal design with a 200mm length.
Odyssey is proud to offer their new tripod post. It allows for the two most popular seat angles amongst riders and it’s clean, light and easy to install. SPECS - 25.4mm diameter - 6061-T6 Aluminium, CNC machined
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm
$269.99 - $289.99
X-Fusion's Hilo Strate dropper seatpost is a no-nonsense post with air spring and hydraulic lockout. The internal cable routing keeps your bike's appearance clean and simple while keeping the cable out of harm's way. The BAT activation remote with uni-directional lever can be mounted on the left or right, above or below the handlebars. - Double key-way design prevents lateral twisting - Double bolt clamp with wide range of seat angle adjustment - Seat clamp fits both standard and 7 x 9 mm Carbon Rails - Cable activated, hydraulic action, infinitely adjustable travel - Weight: 530g - Remote Position: Left or Right - Cable Routing: Internal - 2-year warranty
The TRS+ from e*thirteen is a fully mechanical dropper post focused on reliability, simplicity, and durability. This is a coil spring post with pre-set mechanical stops along it's travel range. No bleeding, no loss of air pressure or depleted nitrogen charge. And, your saddle position is rock solid, locked into place with a heat-treated cam instead of a hydraulic mechanism. The internally routed cable is controlled by a left, shifter-style lever that is best suited to 1x drivetrains. - 4 pre-set travel positions - Shifter-style remote is SRAM MatchMaker compatible, fully weather sealed, and uses a cartridge bearing at the lever pivot - Shop-serviceable with common tools: No oil or air pressure needed - Cable head is at the bottom of the post, clamped at the remote for easier removal during maintenance or shipping - Double bolt clamp: fits both standard and 7 x 9mm carbon rails - 5-Year warranty
Heavy duty bolt-on aluminum seatpost clamp.
The 3D forged and highly adjustable Descendant seatpost is built to do its job so that you can do yours. Set it, forget it, and go harder. - Easy-to-adjust dual bolt head design - Forged and butted 7050 shaft - Forged seat clamps - Max Height: 250mm - Min Height: 40mm - Clamp Style: Standard Rails - Material: Aluminum
Zipp's SL Speed Seatpost has become a favorite of pro road and cyclocross racers because of its light weight and dependability. - Titanium hardware; black, red and white nut retainers included - Minimum insertion length is 100mm - Dual-bolt, low-profile micro-adjust cradle - UD carbon post, head, and clamps
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)
Bike fit is important - a bike should feel like an extension of the body, especially when dialed in. Getting just the right saddle position is second-to-none when putting out power over long miles is concerned. Ritchey Link posts offer two clamp positions for greater adjustability in dialing in the right fit. - 7050 Alloy 2pc Press Fit Head - 15mm adjustable setback - Reversible clamp for greater fore/aft adjustability - Finish: BB black
The K-Force post’s one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There’s also the option of mounting a Shimano Di2 battery in the bottom of the post. - One piece continuous carbon fiber construction - Forged alloy Minimal Top Clamp (MTC) - UD carbon finish - Removable mounting hardware for FSA WE or Di2 battery
The directional butting of the Energy SBS SB20 seatpost’s 6066-aluminum shaft gives it thicker walls fore and aft for stiffness and thinner walls at the sides to cut weight. A forged and machined alloy head is bonded to the top of the shaft. - 3D forged and CNC machined AL6066 w/ alloy head - Directionally butted for low weight and additional strength - Chromoly hardware - Clamp Style: Standard Rails
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Zero25 is a lightweight, universal seatpost with a twist: it’s two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that’s needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use – it now takes 30 seconds to transform your seatpost. And the best news is that despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 Pro has an alloy pillar and comes in two diameters, 27.2mm and 31.6mm, and one length, 350mm.